Spi(Italy Only) / Ripple Control Connection (If Capable) - LG LGE ESS Home 6 Installation Manual

60 Installation

SPI(Italy only) / Ripple Control Connection (if capable)

Using CAT5 (or better) cable, make an RJ45 connector, referring to the figure below, and connect to the
SPI(Italy only) / Ripple Control Receiver.
Make sure the AC circuit breaker, PV switch, and DC circuit breaker of the battery are disconnected before
starting electrical cable connections.
2
Recommended
Pin
Wire Color
1 White-Orange
2 Orange
3 White-Green
4 Blue
5 White-Blue
6 Green
7 White-Brown
8 Brown
Ripple
Control
-
K4 (0 %) Ext. signal
K3 (30 %) Local
Command
K2 (60 %)
K1 (100 %)
- Trip signal
Int.12 V
- GND
* Cable type : CAT5 UTP or better
SPI
-
-
-
-
RJ45 Standard Pin out