Table of Contents
Advertisement
42
Installation
Insert the AC (Grid) cable through the upper cable gland to the right side of the unit.
Pass the AC cable through the cable gland, rubber seal and housing as shown in the figure.
2
Strip off the 3-conductor power wires from at the AC (Grid) as shown in the figure.
2
2
Power wires with a cross-sectional area 4 mm
- 6 mm
Not using the PE equipotential point at the AC output port: two-core (L and N).
Using the PE equipotential point at the AC output port: three-core (L, N, and PE) outdoor copper
cable.
L (Brown)
N (Blue)
PE (Green)
15 mm
115 mm
Advertisement
Table of Contents
