LG LGE ESS Home 6 Installation Manual page 5

CAUTION
y This product is intended for residential use only and should not be used for
commercial or industrial purposes.
y Before testing electrical parts inside the system, it takes at least a 10-minute
standby period to completely discharge the system.
y This inverter includes an integrated residual current device (RCD). If an external
residual current device (RCD) is used, a device of type A or B should be used,
with a tripping current of 30 mA or higher.
y The contents included in this box are the ESS system and its accessories, and
the entire weight is very heavy. Serious injury may occur due to the heavy
weight of the package with product and accessories inside. Therefore, special
care must be taken in handling. Make sure to have at least two persons deliver
or remove the package.
y Do not use any damaged, cracked, or frayed electrical cables and connectors.
Protect the electrical cables from physical or mechanical damage, such as being
twisted, kinked, pinched, closed in a door, or walked upon. Periodically examine
the electrical cables of your product, and if its appearance indicates damage
or deterioration, discontinue use of this product, and have the cables replaced
with an exact replacement by qualified personnel.
y Ensure that the earth ground wire is connected to prevent possible electric
shock. Do not try to ground the product by connecting it to telephone wires,
lightning rods, or gas pipes.
y To prevent a fire or electric shock hazard, do not expose this product to heavy
rain or moisture.
y Do not block any ventilation openings. Ensure reliable operation of the product
and protect it from overheating. The openings must never be blocked by placing
any object on this product.
y The temperature of the metal enclosure may be high during operation.
y In order to avoid radio interference, all accessories (like an energy meter)
intended for connection to the product are suitable for use in residential,
commercial, and light-industry areas. Usually this requirement is fulfilled if the
equipment complies with the class B limits of EN55022.
y The product must be disposed of according to local regulations.
y The electrical installation of this unit must be performed only by an LGE service
person or trained installer, qualified to install PCS.
y If the AC circuit breaker is turned off and the product has not been operated
for a long time, the battery may be overdischarged.
Indicates a situation where damage or injury could
occur. If it is not avoided, minor injury and/or damage
to property may result.
Getting Started 5
1