Table of Contents
Advertisement
WARNING
y The unit must be installed on the floor due to its the heavy weight. Wall support is only for
supporting purposes.
y If installation is difficult due to a stem wall, reinforce the wall or floor to ensure proper installation.
y Be sure the floor is hard enough to support the weight of product.
y Rotate the legs at the bottom of the product to adjust the level.
CAUTION
y The unit is very heavy. Serious injury may occur due to the heavy weight when mounting it on the
wall. Therefore, special care must be taken in handling.
y When hanging the unit on the wall bracket, slowly lower the unit and make sure the unit is
properly mounted on the wall bracket.
y If 4 points on the wall brackets (both sides of the 2 wall brackets) are not properly fixed to the
wall, the product may fall over.
Hang the product on the wall
Then rotate the legs to bring the product level with the floor.
bracket.
Installation
33
Rear
2
Advertisement
Table of Contents
