Loading Paper In The Bypass Tray - Xerox DocuColor DocuColor 4 Quick Start Manual

Loading paper in the bypass tray

Demonstrate how to open the bypass tray and load
paper.
1. See Figure 4. Open the bypass tray by swinging
the door down.
2. Ensure the guide at the front of the tray is flipped
up unless 13 x 19 in. (330 x 483 mm) paper is
being used.
3. See Figure 5. Set the paper guide to the width of
the paper being loaded.
4. Load a stack of paper long edge feed and slide
the paper into the copier/printer until it stops.
Getting to Know Your Product
QuickStart Practice Guide
1
Figure 4
3
Figure 5
2
4
3