Making Reductions And Enlargements - Xerox DocuColor DocuColor 4 Quick Start Manual

Making reductions and enlargements

1. See Figure 46. Open the ADF or document cover.
2. Place an original face down on the document
glass. Orient the original for short edge feed.
3. Close the ADF or document cover.
4. See Figure 47. Press the Copy button.
5. Under Paper Supply, select Auto.
6. Under Reduce/Enlarge, press the s or t but-
tons to select one of the standard enlargement or
reduction ratios, between 64% and 200%.
7. Press the Original Type button.
8. Press the s or t buttons to highlight the desired
color mode on the display.
9. Press the Select button.
10. Press the Start button.
11. A copy will be produced that is reduced or
enlarged from the size of the original.
12. Press the Clear All button to restore the original
settings.
18
1
2
Figure 46
7
5
6 8
Figure 47
3
12
4
10
9
Getting to Know Your Product
QuickStart Practice Guide