Loading Paper In The Bypass Tray - Xerox DocuColor DocuColor 4 Getting To Know Manual

Loading paper in the bypass tray

Demonstrate how to open the bypass tray and load
paper.
1. See Figure 10. Open the bypass tray by swing-
ing the door down.
2. Ensure the guide at the front of the tray is flipped
up unless 13 x 19 in. (330 x 483 mm) paper is
being used.
3. See Figure 11. Set the paper guide to the width of
the paper being loaded.
4. Load a stack of paper long edge feed and slide
the paper into the printer until it stops.
Getting to Know Your Product
Product Orientation Guide
1
Figure 10
3
Figure 11
2
4
7