Advertisement
a. Press in the locking tabs on the sides of the air duct toward the middle of the controller module.
b. Slide the air duct toward the fan modules, and then rotate it upward to its completely open
position.
== Step 2: Replace the boot media
You locate the failed boot media in the controller module by removing Riser 3 on the controller module
before you can replace the boot media.
You need a Phillips head screwdriver to remove the screw that holds the boot media in place.
1. Locate the boot media:
332
Air duct locking tabs
Slide air duct towards fan modules
Rotate air duct towards fan modules
Advertisement
