Safety - Xerox CopyCentre C32 Quick Reference Manual

Spode QRG.book Page 8 Tuesday, May 13, 2003 10:51 AM
S ...
AFETY
Your Xerox product and supplies have been designed and tested to meet strict
safety requirements. These include Safety Agency approval, and compliance to
established environmental standards. Please read the following instructions
carefully before operating the product and refer to them as needed to ensure the
continued safe operation of your product.
The safety testing and performance of this product have been verified using
XEROX materials only.
Follow all warnings and instructions marked on, or supplied with the product.
This WARNING Mark alerts users to the possibility of personal injury.
This WARNING Mark alerts users to heated surfaces.
WARNING: This product must be connected to a protective earthing circuit.
This product is equipped with a 3-wire type plug, provided with an earthed
(grounded) power outlet. This is a safety feature. To avoid risk of electric shock,
contact your electrician to replace the receptacle if you are unable to insert the plug
into the outlet. Never use an earthed (grounded) adapter plug to connect the
product to a power source receptacle that lacks an earth connection terminal.
This product should be operated from the type of power source indicated on the
marking label. If you are not sure of the type of power available, consult your local
power company.
Do not allow anything to rest on the power cord. Do not locate the product where
persons will step or trip on the cord.
Use of an extension cord with this product is not recommended or authorized.
Users should check building codes and insurance requirements if a properly
earthed (grounded) extension cord is to be used. Ensure that the total ampere
ratings of the products plugged into the extension cord do not exceed the extension
cord ampere rating. Also, make sure that the total amperage of all products plugged
into the wall outlets does not exceed the outlet rating.
Disconnect Device for this product is the power cord. To remove all electrical
power to the product, disconnect the power cord from the power receptacle.
Your equipment is equipped with an energy saving device to conserve power
when the machine is not in use. The machine may be left on continuously.
P 1-8 X C C /W C P 32/40 C Q R G
AGE EROX OPY ENTRE ORK ENTRE RO OLOUR UICK EFERENCE UIDE