Viking S Series Service Notebook page 13

30" W. OUTDOOR GAS GRILL CART ASSEMBLY
To mount grill to cart: The support brackets must be attached to the side of the cart before mounting the
grill on the cart. Place the "Z" bracket inside the cart and attach to the support bracket with two (2)
screws and nuts that are provided. (See Figure 1). After attaching support brackets, remove the drip tray
from the grill. Lower the unit just to the inside of the cart assembly. Make certain the grill fits squarely
on the cart. Attach the grill to the cart with the eight (8) screws and nuts provided. (See Figure 2).
Replace the drip tray.
To mount the side self: DO NOT mount the
shelf before the grill is mounted and attached
to the cart. The shelf is attached to the
support brackets with the remaining six
screws and nuts. (See fig.#3
14