Viking S Series Service Notebook page 19

INFRARED SAFETY VALVE / THERMAL COUPLE REPLACEMENT
NOTE: Check the thermal - couple capillary tube connection at the I / R safety valve, make sure it is
tight before condemning the thermal - couple.
•
Remove the back panel to gain access to the
Infrared burner.
•
Remove the Smoker Tray (A).
•
Remove the Burner Valve Knobs (B).
•
Remove the Control Panel (D). (The top
bezel screws secure the control panel to the
manifold support bracket.
•
Remove the Landing Ledge (E).
•
Remove the Thermal Couple capillary tube
(F) from the Infrared Burner Valve.
•
Remove the Thermal Couple (G) from the
bracket at the Infrared Burner and feed the
capillary tube down and through the burner
box.
20