Stored Programming - Xerox CopyCentre C2128 Quick Reference Manual

Stored Programming

Use this feature to program up to 10 commonly used programming sequences. For
example, combinations of selections such as Edge Erase and Bound Originals.
The machine stores only the programming features for the job, NOT the images.
Each time a stored job is used the images must be scanned.
To use this feature, use the up and down scroll buttons on the scrolling list to select
the required storage location, then select a function button - Store or Recall
Programming.
Options:
Use to scroll to a job number between 1 and 10.
J N
OB UMBER
Use this option to store the current programming selections. If a job has already
S
TORE
been stored under the selected Job Number, an Overwrite Confirmation Message
P
ROGRAMMING
appears. If Overwrite is selected, the new programming will be stored.
Use this option to retrieve programming that has been stored under a specified job
R
ECALL
number. First select a Job Number, then select Recall Programming. The recalled
P
ROGRAMMING
programming will overwrite the current copy programming.
After being recalled, the selection can be modified further and re-stored if required.
P 3-32
AGE
X C C /W C
EROX OPY ENTRE ORK
P C2128/C2636/C3545 Q
ENTRE RO
R G
UICK EFERENCE UIDE