Ozone Safety - Xerox CopyCentre C2128 Quick Reference Manual

Operator Accessible Areas
This equipment has been designed to restrict operator access to safe areas only.
Operator access to hazardous areas is restricted with covers or guards, which
would require a tool to remove. Never remove these covers or guards.
Maintenance
Any operator product maintenance procedures will be described in the user
documentation supplied with the product. Do not carry out any maintenance on this
product, which is not described in the customer documentation.
Do not remove covers or guards that are fastened with screws. There are no parts
behind these covers that you can maintain or service. Do not perform any
maintenance procedures unless you have been trained to do them by an authorized
local dealer or unless a procedure is specifically described in the user
documentation.
Cleaning your Product
Before cleaning this product, unplug the product from the electrical outlet. Always
use materials specifically designated for this product, the use of other materials may
results in poor performance and may create a hazardous situation. Do not use
aerosol cleaners, they may be explosive and flammable under certain
circumstances.

Ozone Safety

This product will produce ozone during normal operation. The ozone produced is
heavier than air and is dependent on copy volume. Providing the correct
environmental parameters as specified in the Xerox installation procedure will
ensure that the concentration levels meet safe limits.
If you need additional information about ozone, please request the xerox publication
Ozone by calling 1-800-828-6571 in the United States and Canada. In other
markets, please contact your authorized local dealer or Service Provider.
X C C /W C P C2128/C2636/C3545 Q R G P 1-11
EROX OPY ENTRE ORK ENTRE RO UICK EFERENCE UIDE AGE