Xerox WorkCentre Pro C2128 Quick Start Manual

Note 1: This is a suggested testing procedure that requires
a working knowledge of DOS, and a program called
"Telnet.exe" or "Telnet.com".
Note 2: If the echo function of your telnet program is not
enabled, you will not see what you type at the DOS
command prompt. Please type slowly and carefully.
Fig. 1
Fig. 2
Open a DOS Command Prompt window.
Fig. 3
At the Command Prompt on the DOS screen type: "telnet" the
address of the SMTP server with port number "25". Then press
Enter. The entry should display as in this figure.
Fig. 4
If you receive a Connect failed, repeat step Fig. 3 again. If it
continues to fail, please contact your IT Administrator or your
Internet Service Provider to obtain a working SMTP Server
Address.
SMTP Server Verificaton - 1 of 2
Fig. 5
IP If you receive a ready message similar to the one in this figure,
continue to the next step.
Fig. 6
Type "ehlo your e-mail domain name" and press Enter.