Xerox WorkCentre Pro C2128 Quick Start Manual

Note: Once the envelope setting has been set up as explained
in this pamphlet, you should be able to print from your applica-
tion by setting envelopes as the selected output.
Fig. 1
Fig. 2
Place the envelopes with the flap facing up in the bypass tray as
shown.
Fig. 3
The Envelope should be placed correctly in the bypass tray in
order to get the screen seen in Fig. 4.
Fig. 4
Press Change Size.
Envelope Printing - 1 of 2
Fig. 5
Scroll until the correct envelope size is visible.
Fig. 6
Press 4.1" x 9.5" (#10 envelope). Press Save.
Fig. 7
Press Change Description.