Start-Up - Samson 3756 Mounting And Operating Instructions

6 Start-up

The work described in this section is only to
be performed by personnel appropriately
qualified to carry out such tasks.
WARNING
!
Crush hazard arising from moving parts on
the valve.
Control valves contain moving parts (actua-
tor and plug stem), which can injure hands
or fingers if inserted into the valve.
Î Do not touch any moving valve parts
while the control valve is in operation.
Î Before performing any mounting or
installation work on the booster valve,
put the control valve out of operation by
disconnecting the supply air and control
signal. Protect it against unintentional
reconnection.
Î Do not impede the movement of the actu-
ator and plug stem by inserting objects
into the yoke.
Before start-up, make sure the following con-
ditions are met:
− The booster valve is properly mounted
according to the instructions.
− The air supply has been properly con-
nected.
Start-up
Î Switch on the air supply.
EB 3756 EN
Start-up
6-1