Table of Contents
Advertisement
Brushroll Cleaning
Turn off the machine and unplug the power
cord, rotate the lock knob with a coin or flat-
blade screwdriver from locked position to unlock
position (Fig 8) to remove the cover and roller
brush to clean up(Fig 9).
After brushroll cleaning, snap the hex-gear side
into the base first and press the other side.Install
the cover in the reverse order of removing(Fig
10) .
Notice: for safety reasons, turn off the machine and
unplug power cord before cleaning brushroll.
UV light cleaning and maintenance
Turn off the machine and unplug the power
cord and remove the UV light cover with a cross
screwdriver, wipe the UV light with dry cloth.
After cleaning, assemble parts back in reverse
order.
Notice: for safety reasons, please be sure to turn off the
machine and unplug the power cord before cleaning
UV light in case of electric shock.
Maintenance and storage
Please clean dust cup and filter after each use for further use. It is recommended to replace a
filter after 30-50 hours of working time(depending on specific situation) for better use.
Any paper, lead glass, plastic will greatly affect the effect of UV light. Please wipe and clean the
UV light tube regularly for better use.
Do Not touch the UV light tube as dirt will affect UV light effect.
4
9
Brushroll
10-1
Belt
10-2
Hex-gear
11
Brushroll cover
10-3
Four-corner
Hex-side
side
UV light
cover
Advertisement
Table of Contents
