Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Jimmy JV51
Summary of Contents for Jimmy JV51
- Page 1 JV51 Instruction Manual Vacuum Cleaner...
-
Page 2: Parts Name
Products Installation Unpacking Open the package, take out the foam pad , all accessories and machine from the package, take off the plastic bag and save them for the purpose of future maintenance and repair. Parts Name 1. Electric Floor Head 2. -
Page 3: Main-Body Assembly
Packing List Handheld 2-in-1 Electric Floor Electric Mattress 2-in-1 Part Name Vacuum Upholstery Metal Tube Head Head crevice tool Cleaner Tool Quantity Instruction Wall Part Name Adaptor Battery Pack Storage Base Screws Manual Anchors Quantity Main-body Assembly Assemble battery pack and handheld vacuum cleaner Battery pack assembly: use one hand to hold Battery Pack... - Page 4 Installation of storage base Insert wall anchors into the hole Please drill a hole with a diameter of 6mm and a depth of about 30mm on the wall. Then put the Screw wall anchors into the hole. After positioning Hole the storage base, fx it on the wall with screws.
-
Page 5: Use Of Vacuum Cleaner
JV51’s Charging time is about 5 hours. When On/off Button the charging indicator on the vacuum battery turns from red to green, it means the vacuum cleaner is fully charged. -
Page 6: Use Of Accessories
Use of Accessories 2-in-1 Upholstery Tool: Suitable for dust mites cleaning on bed, sofa and other kinds of fabric furniture. (Picture 11) 2-in-1 Crevice Tool: Suitable to clear narrow seam, blind angle of doors and windows and other narrow places. (Picture 12) Electric mattress head: Especially designed for sofa and mattress, it can beat up and remove the dust mites and bacteria which hide in the... - Page 7 After cleaning and drying(if necessary, please replace HEPA) , reassemble them in the opposite order of the disassembly. HEPA Filter Note: The inlet HEPA should be fully dried before installation. Cleaning Electric Floor Head Dual-cyclonic 1.Use finger to release the brushroll button, take System out the side cover of the brushroll.
-
Page 8: Machine Storage
Storage of Vacuum Cleaner Guide-track Groove Battery Pack Disassemble the Handheld Vacuum Cleaner and Metal Tube Battery Pack Release Button Fix the handheld first, press the release button of metal tube, pull out it. (Picture 20) Conductive Needle Unpack the Battery Pack Metal Tube Release Button Press the battery release button, take out the... -
Page 9: Safety Notes
Safety Notes When using an electrical appliance, basic precautions should always be followed, including the following. READ ALL INSTRUCTIONS BEFORE USING FOR HOUSEHOLD USE ONLY WARNING-To reduce the risk of fire, electric shock, or injury: Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. - Page 10 Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents. Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing appliance.Such preventive safety measures reduce the risk of starting the appliance accidentally.
- Page 11 Please do not use the vacuum to pick up tiny particles such as cement,gypsum powder, wall powder, or large objects such as paper balls, otherwise it will cause malfunctions such as blockage and motor burnout. Avoid blockage to air inlet or brushroll, it may cause motor failure. Do not pour or splash water or other liquids into the machine to avoid short circuit to burn out the machine.
-
Page 12: Troubleshooting
Note: If the soft wire of the power supply is damaged, it must be replaced by professional personnel from manufacturer, maintenance department or similar department in order to prevent risk. Risk of Injury. Brush may start unexpectedly. Disconnect battery pack be ore cleaning or servicing. -
Page 13: Product Specification
Product Specification Technical Parameter Model No JV51 Rated Voltage 21.6V Rated Power 400W Adaptor Model ZD12D250060US Adaptor Input Voltage 100-240V ～ 50/60Hz 0.5A Adaptor Output Voltage 600mA Electric Floor Head Model No. T-EB110 Battery Model T-DC38M Battery Pack Capacity 2500mAh Charging Time Manufacturer: Kingclean Electric Co., Ltd... -
Page 14: Warranty Information
OBTAINING WARRANTY SERVICE: To obtain warranty service you can contact the JIMMY Service Team, email support@ jimmyglobal.com, to discuss the warranty claim and procedures to be followed. All warranty claims must include submission of proof-of-purchase documentation. For additional information, you may also visit www.jimmyglobal.com...