Maintenance And Storage - Jimmy BX7 Pro User Manual

Maintenance and Storage

12
Please clean dust cup and filter after each use
for further use. It is recommended to replace a
filter after 30-50 hours of working
Dust sensor cover
time(depending on specific situation) for better
use.
Any paper, lead glass, plastic will greatly affect
the effect of UV light. Please wipe and clean the UV tube regularly for better use.
Do Not touch the UV tube as dirt will affect UV light effect.
Put the machine in cool and dry place if the machine is to be idled. Do Not leave it in
direct sunlight or humid environment.
The dust sensor cover in the air duct need to be cleaned regularly to avoid affecting
the transmission and reception of infrared signals. (Figure 12)
Cautions
Please read this instruction manual carefully before use and keep it properly for future use.
Never leave the machine working without supervision.
Please turn off the power switch and unplug the power cord if the machine is to be idled. Do
Not unplug the power cord with humid hand in case of electric shock.
Cut the power source in maintenance or off-service.
Keep the power cord away from sharp objects and do not drag the cord to move the
machine in case of cord damage.
For safety reasons, please do not use the product to clean hot objects such as
carbon, cigarette butts, sharp objects such as broken glass, corrosive liquids, flammable
and explosive materials such as gasoline and alcohol. Otherwise it may cause product
damage or fire.
Do not use this product to clean water or wet dust. Do Not operate it in humid places (such
as bathroom, toilet, laundry room, etc.) to avoid malfunction.
Do Not place the machine near heating appliances or expose it to direct sunlight in case of
fire hazard.
Keep this product beyond the reach of special individual such as children without
adult supervision.
Do Not operate this machine with suction port blocked in case of product damage.
20