Table of Contents
Advertisement
_1 Insert the key fully into the console.
See HOW TO TURN ON THE POWER on page
10.
B
Select one of the custom programs.
When the key is
inserted, the
_[]
=ur o_
prog*ams
_[_JC_3[_3C
LEARN I EBII_[_3EZ3EZ3C
manual mode will
--
2 c:_c:_c_c:_c
p ContrOl
ptog_n_s
[_3_[_[_3[_{_
be selected. To
_
.., C:_C:_E_E_mC
select a custom
_m_me
program, press
the Select
Program button repeatedlyuntilthe Learn 1 or
Learn 2 indicatorlights.
For about six seconds after a program is selected,
the InctinelHeart Rate display will flash the maxi-
mum incline setting for the program, and the
Speed display will flash the maximum speed set-
ting for the program, The Time/Pace display will
show how long the program will last. The program
display will show the first ten speed settings for
the program. Note: If only three columns of in-
dicators are lit in the program display, refer to
HOW TO CREATE A CUSTOM PROGRAM on
page 14.
B
Press the Start button or the Speed + button to
start the program.
A moment after the button is pressed, the walking
belt will begin to move. Hold the handrails and
begin walking.
Each program is divided into several one-minute
segments. One speed setting and one inclineset-
ting are programmed for each segment. The
speed setting for the first segment will be shown in
the flashing Current Segment column of the pro-
gram display. (The incline settings are not shown
in the program
display.) The
speed settings
for the next sev-
eral segments
will be shown in
the columns to
the right.
Current Segment
i
._c=c=c =c=c=_c=c_c=Bc
irn_ [ZZI_
g
When only three seconds remain in the first seg-
ment of the program, both the Current Segment
column and the column to the right will flash and a
tone will sound. If the speed and/or incline of the
treadmill is about to change, the Speed/Pace dis-
play and/or the Incline/Heart Rate display will
flash to alert you, and three tones will sound.
When the first segment is completed, all speed
settings will move one column to the left. The
speed settingfor the second segment will then be
shown in the flashing Current Segment column
and the treadmill will automatically adjust to the
speed and incline settingsfor the secondseg-
ment.
The program will continue until the speed setting
for the last segment is shown in the Current
Segment column and no time remains. The walk-
ing belt will then slow to a stop.
If desired, you can redefine the program while
using it. To change the speed or incline setting
for the current segment, simplypress the Speed
or Incline buttons.When the currentsegment iscom-
pleted,the newsettingwillbe saved in memory.To
increase the length of the program, first wait until
the programis completed.Then, press the Startbut-
ton and programspeed and inclinesettingsfor as
many additionalsegmentsas desired.Note: While
you are adding segments to the program, the
speed settingsin the program displaywill not
move to the left. Instead, each time a segment is
completed, the flashing Current Segment column
will move one column to the right. If the Currant
Segment column reaches the right side of the pro-
gram display, when the current segment is com-
pleted, all columns of indicators in the program
display will move three columns to the left. When
you have added as many segments as desired,
press the Stop button twice. To decrease the
length of the program, press the Stop button twice
at any time before the program is completed.
To stop the program temporarily, press the Stop
button. All displays will pause and the Time/Pace
display will begin to flash. To restart the program,
press the Start button or the Speed + button. To
end the program, press the Stop button, remove
the key, and then reinsert the key.
B
Follow your progress with the displays.
See step 5 on page 11.
_',! Measure your heart rate if desired.
See step 6 on page 11.
B
When the program has ended, remove the key.
See step 6 on page 13.
15
Advertisement
Table of Contents
