Verifying Post-Installation Connectivity - HPE Instant On AP27 Installation Manual

Table of Contents

Advertisement

4
5
6
Failure to use the included Ethernet cable gland can lead to connectivity and POE issues.
Outdoor rated Cat5e or above cable should be used for all outdoor wired Ethernet connections and should be
grounded through the AC ground of the PoE.
Two sets of seals are provided in the package for use with the Ethernet cables. One is applicable for cables with
4-6 mm diameter, and the other is applicable for cables with 6-10 mm diameter.

Verifying Post-Installation Connectivity

The integrated LED on the access point can be used to verify that the access point is receiving power
and initializing successfully .
HPE Networking Instant On Access Point AP27 | Installation Guide
Seals
Clip
Sealing Nut
12

Advertisement

Table of Contents
loading

Table of Contents