Summary of Contents for HPE Aruba Networking 630 Series
Page 1
HPE Aruba Networking 630 Series Campus Access Point Installation Guide...
Page 2
Hewlett Packard Enterprise Company. To obtain such source code, please check if the code is available in the HPE Software Center at https://myenterpriselicense.hpe.com/cwp-ui/software but, if not, send a written request for specific software version and product for which you want the open source code.
Specifications, Safety, and Compliance HPE Aruba Networking 630 Series Campus Access Point Specifications Regulatory Model Name Regulatory considerations for AP-634 Brazil Canada European Union and United Kingdom India Japan Korea Medical HPE Aruba Networking 630 Series Campus Access Point | Installation Guide...
Page 4
Mexico Morocco Peru Philippines Singapore Taiwan Thailand Ukraine United States Proper Disposal of HPE Aruba Networking Equipment HPE Aruba Networking 630 Series Campus Access Point |...
About This Guide About This Guide This document describes the hardware features of the HPE Aruba Networking 630 Series Campus Access Point. It provides a detailed overview of the physical and performance characteristics of each access point model and explains how to install the access point.
Hardware Overview The HPE Aruba Networking 630 Series Campus Access Point supports the IEEE 802.11ax WLAN standard in the 6 GHz band (Wi-Fi 6E) as well as the 5 GHz and 2.4 GHz bands, delivering high performance and capacity with MIMO (Multiple-Input, Multiple-Output) and OFDMA (Orthogonal Frequency Division Multiple Access) technologies, while also supporting IEEE 802.11a/b/g/n/ac wireless services.
The LED indicators located on the front cover of the access point indicate the following functions: System Status LED The System Status LED indicates the operating condition of the access point. HPE Aruba Networking 630 Series Campus Access Point |...
Page 8
1. Flashing off: mostly on, fraction of a second off, 2 seconds cycle. LED Display Settings The LEDs have three operating modes that can be selected in the system management software: HPE Aruba Networking 630 Series Campus Access Point | Installation Guide...
The ports on the back of the AP-634 access point are the same as the ones on the back of the AP-635 access point. Figure 3 Back View (AP-635) Table 5: Ports on Back of HPE Aruba Networking 630 Series Campus Access Point Callout Component USB 2.0 Interface...
USB 2.0 Interface The USB 2.0 interface located on the top of the HPE Aruba Networking 630 Series Campus Access Point is compatible with selected cellular modems and other peripherals. When active, this interface can supply up to 5W/1A to a connected device.
The Intelligent Power Monitoring (IPM) feature may also be used to manage the power consumption preferences for this device. When enabled, the user may enable/disable power restrictions for the access point using HPE Aruba Networking's AP management software. Refer to the HPE Aruba Networking 630 Series Campus Access Point datasheet for details on possible functional restrictions when the AP is powered by POE, and how IPM can help to avoid or minimize these restrictions.
Installation Installation The HPE Aruba Networking 630 Series Campus Access Point is designed for ceiling or wall mounted deployments. Several optional mount kits are available to attach the access point to a variety of surfaces. These mount kits are available as accessories and must be ordered separately. Refer to the HPE Aruba Networking 630 Series Campus Access Point ordering guide at https://www.arubanetworks.com.
An AP-CBL-SERU console cable An AP-MOD-SERU console module Refer to the HPE Aruba Networking 630 Series Campus Access Point ordering guide for compatible items, quantities needed, etc. Also, make sure at least one of the following network services is supported: HPE Aruba Networking Discovery Protocol (ADP) DNS server with an “A”...
AP Software Quick Start Guide HPE Aruba Networking access points are classified as radio transmission devices, and are subject to government regulations of the host country. The network administrator(s) is/are responsible for ensuring that configuration and operation of this equipment is in compliance with their country’s regulations.
Temperature Range: –25 °C to 55 °C (–13 °F to 131 °F) Humidity Range: 10% to 100% non-condensing For additional specifications on this product, please refer to the HPE Aruba Networking 630 Series Campus Access Point data sheet. The data sheet can be found at https://www.arubanetworks.com.
This radio transmitter model APIN0634 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed in the HPE Aruba Networking 630 Series Campus Access Point ordering guide (link provided below) below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.
EU & UK Declaration of Conformity Compliance is only assured if the HPE Aruba Networking approved accessories as listed in the HPE Aruba Networking 630 Series Campus Access Point ordering guide are used.
User Guide/Instant User Guide for details on restrictions. UKCA Marking India This product conforms to the relevant Essential Requirements of TEC, Department of Telecommunications, Ministry of Communications, Govt of India, New Delhi-110001 Japan Korea HPE Aruba Networking 630 Series Campus Access Point |...
This device is intended for indoor use in professional healthcare facilities. This device has no IEC/EN60601-1-2 essential performance. Compliance is based on the use of HPE Aruba Networking approved accessories. Refer to the ordering guide for this access point at https://www.arubanetworks.com...
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or TV technician for help. HPE Aruba Networking 630 Series Campus Access Point | Installation Guide...
Page 22
10,000 feet. Operation in the 5.9725-7.125GHz band is prohibited for control of or communication with unnamed aircraft systems. HPE Aruba Networking 630 Series Campus Access Point |...
Proper Disposal of HPE Aruba Networking Equipment HPE Aruba Networking equipment complies with countries' national laws for proper disposal and electronic waste management. China RoHS table India RoHS material content declaration This product complies with the “India E-waste (Management) Rules, 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule II of the Rule.
Page 24
Taiwan RoHS statement Turkey RoHS material content declaration Türkiye Cumhuriyeti: AEEE Yönetmeliğine Uygundur HPE Aruba Networking 630 Series Campus Access Point |...