Wiring Connector-Type I/O Unit(Wire-Pressed Terminal Cable) - Panasonic FP7 Series User Manual

3.4 Wiring Connector-type I/O Unit(Wire-pressed Terminal Cable)

3.4 Wiring Connector-type I/O Unit(Wire-pressed Terminal Cable)

■
Specifications of connectors for wire-pressed terminal cable
This is a connector allowing loose wires to be connected without removing the wire's insulation.
A dedicated pressure connection tool is required to connect the loose wires.
Wire-pressed connector (40P)
■
Suitable wires (strand wire)
Size
AWG22
AWG24
■
Wiring with connectors for wire-pressed terminal cable (provided with unit)
Manufacturer
Panasonic-made
(AFP2801)
(Note 1) The 32-point-type unit is provided with one set and the 64-point-type and I/O mixed units are provided
with two sets each. If you need more connectors, purchase AFP2801 (2 sets/pack).
■
Pressure connection tool
Manufacturer
Panasonic-made
3-10
Nominal cross-sectional
area
2
0.3 mm
2
0.2 mm
Unit type and required quantity
Composition of
32-point-type Input Unit
components
32-point-type Output Unit
Housing (40P) 1 x 1 set
Semi-cover (40P) 2 x 1 set
Contact (for AW22
or 24)
8 x 1 set
5 pins
Product No.
AXY52000FP
Insulation thickness
1.5 to 1.1 dia.
64-point-type Input Unit
64-point-type Output Unit
I/O mixed unit
1 x 2 set
2 x 2 set
8 x 2 set
Rated current
3A
WUME-FP7DIO-05