Table of Contents
Advertisement
68012005016-DJ
Chapter 2: Advanced Features
2.4.1
Receiving a Call Alert Page
When and where to use: When you receive a Call Alert page, you hear four repeating alert tones and
the LED blinks green. The call received icons blinks and the display shows Page received.
Procedure:
Press any button to clear the Call Alert page.
2.4.2
Sending a Call Alert Page
When and where to use:
Your radio must be preprogrammed for you to use this feature.
Procedure:
•
Press the preprogrammed Quick Access (One-Touch) Call Alert Paging button to send a
page to the preprogrammed ID.
If the call alert page is sent successfully, a tone sounds and the display shows the current zone
and channel name.
If the call alert page is not acknowledged, a tone sounds and the display shows the current zone
and channel name.
2.5
Emergency Operation
The Emergency feature is used to indicate a critical situation. If the Orange button is preprogrammed
to send an emergency signal, this signal overrides any other communication over the selected channel.
Your radio supports the following Emergency modes:
•
Emergency Alarm
•
Emergency Call (Trunking Only)
•
Emergency Alarm with Emergency Call
•
Silent Emergency Alarm
Check with your dealer or system administrator for more information on the programming of this
feature.
Only one of the Emergency modes can be assigned to the preprogrammed Emergency button.
The radio operates in the normal dispatch manner while in Emergency Call, except if enabled, it
returns to one of the following:
Tactical/Non-Revert
The radio sends an emergency alarm and/or makes an emergency call on the current channel.
Non-Tactical/Revert for Conventional System
The radio reverts to the preprogrammed emergency channel to send an alarm and/or make an
emergency call.
Non-Tactical/Revert for Trunking System
The radio reverts to the preprogrammed emergency talkgroup (trunking system) or channel
(conventional system) to send an alarm and/or make an emergency call.
48
Advertisement
Table of Contents
