Table of Contents
Advertisement
Modify a setting
When tapping a list item, a selection screen pops up. The user can modify the setting by tapping '–'
or '+' and can confirm by tapping 'V' or decline by tapping 'X'.
Auto restart menu
Tap the Auto restart icon to enter the Auto Restart menu.
The controller has a built-in function to automatically restart the unit when the voltage is restored
after voltage failure. For units leaving the factory, this function is made inactive. If desired, the
function can be activated. Consult your supplier.
Through this menu, the automatic restart can be activated. The activation is password protected.
The automatic restart settings can also be changed.
Enter a password
When tapping a password protected item, a selection screen pops up. The user can enter the
password by swiping up or down to select the desired number. Once the 4 digits are entered, the
user can confirm by tapping 'V' or decline by tapping 'X'.
Modify a setting
When clicking a list item, a selection screen pops up. The user can modify the setting by tapping '–'
or '+' and can confirm by tapping 'V' or decline by tapping 'X'.
3.12
Controller settings menu
Function
This screen is used to display the following submenus:
•
Network Settings
•
Localisation
•
User Password
•
Help
•
Information
These submenus can be entered by tapping the icons.
46
If the function is activated and provided the regulator was in the automatic
operation mode, the unit will automatically restart if the supply voltage to the
module is restored.
The ARAVF label shall be glued next to the controller.
Instruction book
2920 7196 21
Advertisement
Table of Contents
