Table of Contents
Advertisement
Instruction book
Check the main screen (1) regularly for readings and messages. The display normally shows the
compressor. outlet pressure, while the status of the compressor is indicated by pictographs.
Remedy the trouble if alarm LED (2) is lit or flashes, see section Shutdown warning, Shutdown and
Problem solving.
The panel will show a service indication (3) if a service plan interval has been exceeded or if a
service level for a monitored component has been exceeded.
Carry out the service actions of the indicated plans or replace the component and reset the relevant
timer, see section Service warning.
2920 7196 21
Figure 26: Control panel Elektronikon
™
Touch
79
Advertisement
Table of Contents
