Function
Control mode
Display language
Manual unload
(only on fixed
speed units)
Week timer
Remaining running
time
Internal SmartBox
Auto restart
3.6
Menu screen
Function
This screen is used to display the different menus where settings can be viewed or changed.
Procedure
The Menu screen can be viewed by tapping the Menu button or by swiping right, starting from the
main screen.
Description
36
Description
The control mode can be changed by tapping this icon.
•
Local control via start/stop buttons
•
Remote control via digital input(s)
•
LAN control via the network.
When in Remote or LAN control, the start/stop buttons on the controller will
not work.
The display language of the controller can be changed by tapping this icon.
When tapped, the machine will go in Manual unload mode until the icon is
tapped again.
Week timers can be set by tapping this icon.
The Remaining running time can be set and modified by tapping this icon.
The reception quality of the internal antenna can be monitored.
Each bar represents 25% reception strength. If the four bars are filled, the
reception strength is 100%. If only one bar is filled, the reception strength is
just 25%.
Auto restart can be activated by tapping this icon.
Instruction book
2920 7196 21