Table of Contents
Advertisement
Instruction book
•
Remove any dirt from the coolers with a fibre brush. Brush in the direction of the cooling fins.
Also remove any dirt from the fan with a fibre brush.
•
Next, clean with an air jet in the reverse direction to normal flow. Use low pressure air. If
necessary, the pressure may be increased up to 6 bar(e) (87 psig).
•
If it is necessary to wash the coolers with a cleaning agent, consult your supplier.
•
Remove the cover used during cleaning.
•
Mount the service plates. (1)
2920 7196 21
89
Advertisement
Table of Contents
