Installation - Eneo IND-58F0028MTLA Quick Installation Manual

1 - INSTALLATION

Step 1: Use the mounting template to mark
the desired mounting position.
Step 3: Turn the base and align the screw
with the triangle symbol, then remove the
camera as shown in the illustration below.
Step 5: To position the camera, align it
with the triangle symbol and turn it in the
direction shown in the illustration.
14
Step 2: Loosen the screw as shown in the
illustration below.
Mounting Template
Step 4: Drill the holes marked on the
mounting template and use plugs and
screws to secure the base.
Step 6: Align the camera at the desired
angle and tighten the screw again to secure
the camera.