Eneo IND-58F0028MTLA Quick Installation Manual page 11

Operation
• The devices may only be operated within the temperature and humidity ranges specified in the data sheet.
• Sufficient ventilation must be provided to prevent overheating. This applies in particular to devices such as
recorders and switches that can generate heat.
• Ensure that no sight lines are blocked and that accessories do not obscure areas used by other equipment or
people.
• Ensure cameras are oriented to provide a clear view of the desired area without interfering with people's
privacy.
Cleaning & Maintenance
• Clean the lenses and housings of the cameras regularly to ensure a clear view.
• Keep the ventilation slots clean and free of dust to ensure efficient cooling.
• Use a mild detergent for cleaning. Harsh cleaning agents such as thinner or benzine may permanently damage
the surface.
• Check the product regularly for damage and signs of wear.
• Only use original spare parts (e.g. connection cable) or accessories from VIDEOR E. Hartig GmbH.
• Any tampering by unauthorized persons will void the warranty.
• Before opening the housing, disconnect the power supply.
Warning, Privacy & Legal Notices
• Draw the attention of visitors to the fact that they are being recorded by means of clearly visible notices.
• If necessary, point out rules of conduct.
• Ensure that cameras are oriented in such a way that privacy is not violated, e.g., by recording neighbours or
public areas.
• Comply with local laws and regulations on video surveillance and data protection (GDPR).
EN
11