Q6 - How To Update The Firmware - ICP DAS USA MDC-211-ZT User Manual

Q6 - How to update the firmware?

Mdc-211-ZT can update the firmware via a software tool (Windows) by the following steps:
(1) Download the latest version of the firmware program and update Tool (FW_Update_Tool)
on the MDC-211-ZT product page and store it in a computer that you want to connect
to MDC-211-ZT.
Firmware Program:
-
http://ftp.icpdas.com/pub/cd/usbcd/napdos/zigbee/zt_series/firmware/mdc-211-zt
Update Tool:
- http://ftp.icpdas.com/pub/cd/usbcd/napdos/zigbee/zt_series/tools
(2) Short the FW with P.GND of MDC-211-ZT and turn on the power. When the six LEDs of
MDC-211-ZT turn blinking alternately, the MDC-211-ZT is successfully entered the
firmware updating mode.
(3) Execute "FW_Update_Tool.exe" with the administrator privileges ( ) and follow the steps
as Figure 5.3:
In "Download Interface", select a network port for connecting to MDC-211-ZT.
In "Firmware Path", select the latest firmware update file (MDC211ZT_xxxx.fw).
In "Firmware Update", click "Update" to start the firmware updating.
D-
INIT
PWR
P.GND
F.G.
ICP DAS, MDC-211-ZT user manual , v1.0
Copyright © 2018 by ICP DAS. All rights are reserved.
D+
FW
GND
RxD
TxD
Link/Act 10/100M
Page 42