Modbus Slave Setting Parameters - ICP DAS USA MDC-211-ZT User Manual

 Example
Table 4.6 below is a setting example to set MDC-211-ZT to Modbus Master, and the
recommend parameters.
Table 4.6 MDC-211-ZT and M-7000 or PLC communication setting example
Project
Modbus Timeout
Modbus Retry
Polling Interval

4.2.2. Modbus Slave Setting Parameters

 Parameter description
Table 4.7 below is the descriptions for Modbus Slave setting parameters and the setting
notes.
Table 4.7 Modbus Master related parameter descriptions
Item Description
Modbus
Modbus ID
Number
ZigBee
Note
The station number for setting MDC-211-ZT to Modbus
Station Slave
Users can change the value as needed (1~255)
ICP DAS, MDC-211-ZT user manual , v1.0
Copyright © 2018 by ICP DAS. All rights are reserved.
200
3
30
RS-485
150
3
20
Page 37
RS-232
150
3
0