Format Descriptions For The Configuration File (*.Csv) - ICP DAS USA MDC-211-ZT User Manual

3.2.

Format Descriptions for the Configuration File (*.csv)

If the user wants to set up MDC‐211-ZT through the *.csv configuration file, the user can
export a *.csv file from the Web Interface as the configuration template. For the detail steps,
please refer to "3.1 Export and Import the Configurations ".
The MDC‐211-ZT configuration file includes all setting parameters. The label name and
order must be the same as the example in Figure 3.3. Below will introduce the settings of
ZigBee, Serial port and Ethernet, and the settings for Modbus Master and Modbus Slave.
NOTE
- *.csv template can be got via the MDC-211-ZT Web Interface (refer to Section 3.1).
Figure 3.3 MDC-211-ZT configuration file (*.csv)
ICP DAS, MDC-211-ZT user manual , v1.0
Copyright © 2018 by ICP DAS. All rights are reserved.
Page 27