Parameter Descriptions; Communication Interface Parameter Descriptions; Zigbee Communication Interface - ICP DAS USA MDC-211-ZT User Manual

4. Parameter Descriptions

This chapter introduces a variety of setting parameters and examples for the users to follow
and set up the modules.
4.1.

Communication Interface Parameter Descriptions

ZigBee Communication Interface

4.1.1.
 Parameter descriptions
Table 4.1 shows the descriptions for the ZigBee parameters, setting range and notes.
Item Description
Pan ID
Network ID
Node ID
Radio Frequency
RF Channel
Channel Code
Transmit Power
RF Power
Encryption
Communication
Encryption
(AES 128)
Table 4.1 ZigBee related parameter descriptions
Note
ZigBee Setting range: 0x0000 ~ 0x3FFF
Must set the same Pan ID in the same domain network
Coordinator/Host: Fixed to 0x0000
ZigBee
Router/Slave: setting range within 0x0001 ~ 0xFFF7
No duplicate node number under the same domain
Node ID
network
Setting range: 0 ~ F (2405~2480 MHz)
Must set to the same if in the same domain network
Signal strength from small to large: 0~F. Factory default: 8
(Compatible with the CE/FCC specification limitation)
This parameter is only for testing purposes. If the users
change it that is a personal behavior, the ICP DAS cannot
guarantee that the user-changed parameter is still
Code
compatible with the CE/FCC specification limitation, and
ICP DAS assumes no legal liability for any damage
resulting from the change of the parameter.
Enable or disable
Must set to the same if in the same domain network
ICP DAS, MDC-211-ZT user manual , v1.0
Copyright © 2018 by ICP DAS. All rights are reserved.
Page 32