SMC Networks PF3A701H Operation Manual page 60

: Measurement mode can return from any setting item by pressing the S button for 2 seconds or longer.
: An increase or decrease in flow will have no effect on the output while the output operation is being performed.
Analogue output check
Press the ▲ or ▼button to select
analogue output check.
0 V or 4 mA is output when [Lo], and 5 V (0 V) or 20 mA
is output when [Hi].
: ( ) is an output value when 0 to 10 V is selected.
Press the S button to set.
[F98] Setting of output check completed
-60-
Return to function selection
mode.
No.PF※※-OMX0007-B