b. When window comparator output mode is selected
Input of set value (Lower limit value)
Set the flow based on the setting method on page 33.
The snap shot function can be used. (Refer to page 62)
Press the S button to set.
Input of set value (Upper limit value)
Set the flow based on the setting method on page 33.
The snap shot function can be used. (Refer to page 62)
Press the S button to set.
Setting of Hysteresis
Set the flow based on the setting method on page 33.
Press the S button to set.
: Example for 3000 L/min type the above
: The set value and hysteresis settings limit each other.
Move on to input of set value (upper limit value).
Move on to setting of hysteresis.
Move on to select display colour.
Select display colour
(Refer to select display colour of page 36.)
-38-
No.PF※※-OMX0007-B