[Window comparator mode]
Set PL, the lower limit of the switch operation, and PH, the upper limit of the switch operation, and WH
(hysteresis) following the instructions given above. (refer to setting method on page 27)
(When reversed output is selected, the main screen displays nL and nH.)
[Accumulated output mode]
Set each P (set value), referring to the Setting method on page 27.
(When reversed output is selected, the main screen displays n.)
Refer to the switch output modes list for the relationship between the set values and operation (page 33).
-28-
No.PF※※-OMX0007-B