Table of Contents
Advertisement
Connecting
5.2 Device connections
USB downstream connections
The USB downstream connections enable communication with external devices.
USB upstream connections
The USB upstream connections enable communication between the monitor and a connect‐
ed PC.
The USB upstream socket ④ next to the stereo jack connection is used for service purpos‐
es.
5.2.1
Power connector
The device power connector is located within the connector panel under a cover on the rear
of the device. The power supply is connected using an appliance plug.
Please note the following.
CAUTION
Connecting to line power
The device is designed for line power with a grounded neutral conductor.
• To avoid risk of electric shock, this device must only be connected to line power with a
protective conductor
• Contact the responsible building technician or a qualified electrician if you are uncertain
whether the line power is equipped with a protective conductor.
CAUTION
Risk of damage to the device
• Only use the power cord supplied with the device , or a connection cable with a protec‐
tive conductor and an appliance plug in accordance with DIN 49 49547, IEC 60320
(max. length 3 m, cable e.g. H05VV-F 3x1.0 mm
safety regulations of the respective country.
• Device fuses may only be replaced by authorized repair centers. The failure of a device
fuse may result in a defect in the device. Do not use any other fuse.
Note
Installations in the USA and Canada
Molded power supply plugs must comply with the requirements for "hospital grade attach‐
ments" CSA Std. C22.2 No. 21 and UL 498.
Note
Installations in China
Power cables, power supply plugs and appliance plugs must be CCC-certified.
22
2
). The cable must comply with the
Instruction for Use, 03/2014
RadiForce LX300W
Advertisement
Table of Contents
