Uniden EXAI 398 Series Owner's Manual page 32

EXAI398 12/26/2 10:33 AM Page 32
• Normally the idle time
for the menu mode is 30
seconds before the
system returns to
standby. However for
setting the time, the
idle time is extended to
two minutes.
• Press and hold skip/ff
or repeat/rew to quickly
scroll through the
numbers on the display.
[ 32 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E
Setting the Time
The clock on the phone answering system starts when power is supplied to the base. Follow
these steps to set the clock to the correct time.
1) Press menu.
2) Press skip/ff or repeat/rew until the correct day is announced. The
3) Press set/ringer to select the day.
4) Press skip/ff or repeat/rew until you hear the correct hour setting.
5) Press set/ringer to select the hour.
6) Press skip/ff or repeat/rew until you hear the correct minute
7) Press set/ringer to select the minute.
8) Press skip/ff or repeat/rew until you hear the correct AM or PM
9) Press set/ringer to select the AM/PM setting.
You hear a confirmation tone, then the announcement "Time" and the
time and day are announced for your review. The base LED displays the
number that corresponds with the day of the week.
The system announces "Time" and the current time. The message
counter displays the current numbers ([
the day of the week.
numbers [ ] through [
The numbers [ ] through [
hour is announced.
setting. The numbers [
as each minute is announced.
setting.
The message counter displays [
] through [
] are displayed on the base.
] are displayed on the base as each
] through [ ] are displayed on the base
] or [ ].
]) indicating
www.uniden.com