Uniden EXAI 398 Series Owner's Manual page 33

EXAI398 12/26/2 10:33 AM Page 33
Setting a Personal Security Code (PIN)
To play your messages from a remote location, you will need to enter a two-digit Personal
Identification Number (PIN) code (00-99). To select a PIN, perform the following steps:
1) Press menu twice.
"Security code" and the current PIN code is announced as it is displayed on the base.
2) Press skip/ff or repeat/rew until the desired number appears.
3) Press set/ringer to select the PIN code. You hear a confirmation tone, then the
announcement "Security code" and the new PIN code is announced.
Setting the ring time
The ring time setting allows you to set the number of rings the caller hears before your
answering system plays the outgoing message. You can set the ring time to answer after two,
four, or six rings. Setting
have new messages, and after four rings if there are none. This way, if you make a long distance
call to check your messages, you can hang up after the second ring to avoid billing charges.
1) Press menu three times.
You hear "Ring time" and the current ring time ([
and it is displayed on the base.
2) Press repeat/rew or skip/ff until the desired ring time appears.
3) Press set/ringer to select the new ring time. You hear a confirmation tone, then the
announcement "Ring time" and the new ring time is announced.
www.uniden.com
(Toll Saver), the answering system picks up after two rings if you
] 2, [
T H E I N T E G R A T E D A N S W E R I N G D E V I C E
] 4, [
] 6, [ ] Toll saver),
The PIN code is set to "80"
when you purchase the
phone.
[ 33 ]