Uniden EXAI 398 Series Owner's Manual page 47

900mhz integrated digital answerer with caller id/call waiting
Table of Contents

Advertisement

EXAI398 12/26/2 10:33 AM Page 47
Liquid Damage
Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the following steps.
Case
If the handset or base is exposed
to moisture or liquid, but only
affects the exterior plastic housing.
If moisture or liquid has entered
the plastic-housing (i.e. liquid can
be heard in the phone or liquid has
entered the handset battery
compartment or vent openings on
the base).
www.uniden.com
Wipe off the liquid and use as normal.
Handset:
1. Remove the battery cover and leave it off for ventilation.
2. Remove the battery pack by disconnecting.
3. Leave the battery cover off and the battery pack disconnected for at least 3 days.
4. Once completely dry, reconnect the battery pack and the battery cover.
5. Recharge the handset's battery pack for 20 hours in the base unit before using the phone.
Base:
1. Disconnect the AC adapter from the base unit, cutting off electrical power.
2. Disconnect the telephone cord from the base unit.
3. Let dry for at least 3 days.
IMPORTANT: You must unplug the telephone line while recharging the battery pack to avoid charge
interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the
handset, base and the microwave oven.
After following these steps, if your cordless telephone does not work, please send to:
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd.
Ft. Worth, TX76155
1-800-554-3988. Monday through Friday
8 a.m. to 5 p.m. CST
Action
A D D I T I O N A L I N F O R M A T I O N
[ 47 ]

Advertisement

Table of Contents
loading

Table of Contents