Memory Dialing; Storing Phone Numbers And Names - Uniden EXAI 398 Series Owner's Manual

EXAI398 12/26/2 10:33 AM Page 18
In memory dialing
operation, you must press
a key within 30 seconds.
Otherwise, an error tone
will sound and the phone
will return to standby.
If you return the handset
to the base, the phone
will return to standby
also.
[ 18 ] M E M O R Y D I A L I N G

Storing Phone Numbers and Names

Memory Dialing allows you to dial a number using just a few key presses. Your cordless
telephone stores up to 10 names/numbers in the handset.
1) Press and hold mem until " Memory Store " is displayed.
2) Press or keys, or enter a number (0 - 9) to select the memory
location where you would like to store the number.
3) Press select. The following screen appears and a cursor flashes
indicating that the display is ready for the name to be entered.
If this screen appears, the selected memory location is already stored.
Then you must either edit the entry in this location, delete the entry
in this location, or select " Go Back " to choose another location.
4) To enter a name (up to 14 characters), use number keys.
• See the "Steps for Entering Names and Special Characters".
(See page 20)
/tone /
• Use #/ and *
• Use delete/ch to delete characters as needed.
• Press and hold delete/ch to delete all the characters.
• If a name is not required, go to step 5.
5) Press select. " Store Number " is displayed.
The cursor flashes indicating that the display is ready for the number
to be entered.
to move the cursor to the desired location.
Memory Store
1
2
Store Name
Edit Memory 1
Delete Memory 1
Go Back
Store Number
www.uniden.com