Table of Contents
Advertisement
EXAI398 12/26/2 10:32 AM Page 3
Step 1 Checking the Package Contents
Make sure you have received the following items in
the package. If any of these items are missing or
damaged, contact the Uniden Parts Department.
• Base unit
• Handset
• AC adapter
• Rechargeable battery
• Telephone cord
• Beltclip
• This Owner's Manual
• Other Printed
Material
Step 2 Install and Charge the Handset Battery
TO INSTALL THE HANDSET BATTERY
A
Remove the cover.
Connect the battery pack
B
connector with the
correct polarity.
C
Replace the cover.
Plug the AC adapter cord into the base
D
unit and then into a 120V AC outlet.
www.uniden.com
E
When the handset battery pack is fully charged,
Uniden Parts Department at
after 15-20 hours of charging, plug the telephone
(800) 554-3988
cord into the base unit and then into a telephone
Hours: M-F 7:00 a.m. to
wall jack.
5:00 p.m. CST.
We can also be reached on
Your phone is set for tone dialing. If your local
the web at www.uniden.com
network requires pulse dialing, please see
"Choosing the dial mode" on page 14.
Note: Three Caller ID options are available: AutoTalk,
Caller ID on Call Waiting (CIDCW), and Area Code.
TO SET CALLER ID, LANGUAGE AND DIALING OPTIONS
A
B
C
D
Place the handset on the base and charge
continuously for 15 - 20 hours before using
the phone.
Step 3 Connect to Phone Line
Step 4 Setting Display Options
redial
select
delete
mem
pause
channel
Press and hold cid/menu key.
Press vol/ring/
or vol/ring/
keys to
move the pointer to an option.
Press select to change the option setting.
Press end to exit.
Q U I C K R E F E R E N C E G U I D E
Step 5 Set Answering System
To turn answering system on, press answer on/off.
A pre-recorded greeting will play and your system
is ready to accept calls.
To record a personal outgoing greeting to callers,
please see page 36.
[ 3 ]
Advertisement
Table of Contents
