Table of Contents
Advertisement
EXAI398 12/26/2 10:33 AM Page 17
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise increases. If
you pass the range limits of the base unit, your call will terminate within 5 minutes.
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the phone´s
channel for clear operation. This function works only when the phone is in use.
Press delete/ch. "
Scanning
channel. For more information on interference, refer to "Precautions" on page 50.
Page
To locate the handset (while it's off the base), press find hs on the
base. The handset beeps for 60 seconds.
Paging is canceled when pressing any handset key, find hs on the base
or the handset is returned to the base.
Flash and Call Waiting
www.uniden.com
" appears on the display, indicating the phone is changing to another
If you have "Call Waiting" service and a call waiting tone sounds
while you are on a call, press talk/flash to accept the waiting call.
There is a short pause, then you will hear the new caller. To return to
the original caller, press talk/flash again.
You must subscribe through your local telephone company to receive Call
Waiting Service.
The UltraClear Plus
TM
true
compander circuitry
virtually eliminates
background noise. This
innovative technology,
together with 20 different
channels, provides you
with the best possible
reception during all your
conversations.
hints
You can cancel paging by
pressing the find handset
key on the base.
B A S I C S
[ 17 ]
Advertisement
Table of Contents
