LifeSpan Delta 2.0 User Manual page 13

2.2 Under the condition of FAT program, it is used to select the parameters: the selection order is: "gender", "age",
"height" and "weight".
3. Knob Key Function:
3.1 "START" button: Press the START button to initiate the treadmill; it will start running three seconds after
counting from the lowest speed or program default speed.
3.2. "STOP" button: Press the STOP button during exercise to gradually slow down the treadmill until it comes to a
complete stop. It then enters the pause state, and pressing it again resumes the standby state.
4. SPEED +, -: Adjustment for SPEED addition and subtraction. Speed can be adjusted while moving and can also
be used to adjust parameters when stopping.
5. SPEED (6, 9): Quick SPEED adjustment key.
6. INCLINE +, -: Adjustment for ascending and descending. The number of lifting segments can be adjusted while
moving, and to set parameters on programs.
7. INCLINE (6, 9): Incline shortcut adjustment key.
KNOB KEY FUNCTION: START/PAUSE/STOP KEY
3.1. When in standby, a short press starts the treadmill. After a short press, the treadmill begins running from the
lowest speed or program default speed after 3 seconds.
3.2. During running, a short press of pause displays "PAU," keeping all data unchanged.
3.3. When paused, a short press resumes movement, starting counts from before pausing, and the speed starts
from the lowest speed with dynamic recovery, Ascension to 0.
3.4. While running or pausing, a long press stops the treadmill, gradually slowing it down to resume standby after
stopping.
3.5. While running, the rotation can adjust the speed. During setting, rotate the adjustable parameters.
Note: When any key is pressed effectively, it will be accompanied by a prompt tone, and when the parameter
adjustment of the key exceeds the limit, it will be accompanied by a long tone prompt. There will be no prompt
tone when the key is pressed ineffectively.
MAIN FUNCTIONS
Turn on the power, and all windows light up for 2 seconds before entering the standby state.
1. Quick start (manual mode): Put on the safety lock, press the start button, and after a 3-second countdown, the
treadmill starts from the lowest speed. Adjust the SPEED using the addition and subtraction keys and adjust the
number of lifting segments using the INCLINE keys. To stop running, press the stop button or directly disconnect
the safety lock.
2. Countdown MODE: Press the "MODE" button to choose time countdown, distance countdown, or calorie
countdown. The window displaying the default value flashes. Use the "SPEED +, -" (INCLINE +, -) keys to adjust to the
desired value. Press the START key, and after a 3-second countdown, the treadmill starts running from the lowest
SPEED. Adjust the speed using the SPEED keys and the number of incline segments using the INCLINE keys. When
the window value reaches 0, the treadmill slows down to stop. Alternatively, press the "STOP" key or disconnect the
security lock to stop running.
ASSEMBLY INSTRUCTIONS | 13