Printing - Novexx Solutions EIDOS XTO Series User Manual

User Manual XTO intermittent series

PRINTING

Description of operation
(Refer to Chapter "Product Description – Operating Panel" of this manual.)
Switch on the printer and wait for the programme loading phase.
The printer can receive the commands from the production line if it is in READY (automatic) status.
Load the label to be printed.
Put the printer in MAN (manual) mode and click to the
Load new label /Operator data
button.
Select the desired label, choosing it from the disk
[flash CPU disk C] or from disks [A/B] (USB memory
stick).
Set any consecutive number and the variable data,
using the keyboard of the PC or HMI.
On the display, check that the label and data entries
are correct. The zoom function is available: on the
right side of the screen you can drag the label up and
down and zoom it in and out.
Figure 42: loading a label
Edition C - 01/2024 32 Operation