Device Management - Novexx Solutions EIDOS XTO Series User Manual

User Manual XTO intermittent series

DEVICE MANAGEMENT

1. Fixed from label mode: configuration of the label file: use .LM1 file.
From Easycode, set the pitch P and the number of prints (tracks) N.
2. Varianle from printer mode:
a. print of one track (Single pass – Passage Number =1)
Set the parameters in the
Recommended settings of other parameters:
Print Start Delay = 0 ms
Make sure that the packaging film is stopped
when it starts printing.
Edition C - 01/2024
Figure 84: Easycode programme
Figure 85: example of printing one track
sw page.
61 Multipitch MOTORIZED POSITIONER