User Manual
XTOXLnie/ XTOXLnce
DANGEROUS AREAS ON THE PRINTING UNIT
Dangerous areas - front and bottom view
Note:
if in intermittent mode, during the installation it is necessary to fix the
printing plate and the printing unit so that the plate prevents finger access
to the areas [A] and [B] where the carriage with the print head moves.
if in continuous mode, the zones [A] and [B] are potentially dangerous zones
during the movement of the carriage to search for the position of the
printing roller, which occurs exclusively at the start and after the release of
an anomaly. The carriage does not move during the normal print cycle.
Edition A - 01/2024
s1
S
Y
T
Figure 1: dangerous areas - front view (RH version shown)
A
Figure 2: dangerous areas – bottom view (RH version shown)
H
X
t
B
4
s2
Information