Table of Contents
Advertisement
User Manual
XTO intermittent series
CLEANING THE PRINT HEAD
Switch off and lock out the printer before performing this task!
You are advised to clean daily the printing line of the thermal head located on the printing unit.
Clean the fixed pin [P] located on the left side of the printing head.
How to operate
1.
Switch off the printer and remove the front cover.
2.
Move the carriage manually to have easy access to the head area from the top.
3.
Clean the printing line [L] with a clean tissue or with a paper cleaning tissue soaked in isopropyl
alcohol. On no account use metal objects or any hard material.
In case of XTO22i.nn model perform the operation for both the carriages.
CLEANING THE PRINTING PLATE
Clean with a cleaning tissue or with a paper tissue soaked in isopropyl alcohol.
Advisable when the printer is in fixed position.
How to operate
1.
Switch off the printer and remove the rolls of thermal ribbon.
2.
Move manually the carriage to the end of its stroke to have access to the printing plate
surface.
3.
Clean the print plate surface.
In case of XTO22i.nn model, move manually both carriages to have a good access to the
complete printing plate.
Edition C - 01/2024
L
P
Figure 89: cleaning the print head
65
P
Preventive Maintenance
Advertisement
Table of Contents
