Rear Connection Panel - Novexx Solutions EIDOS XTO Series User Manual

User Manual XTO intermittent series

REAR CONNECTION PANEL

WARNING!
This printer operates using 48Vdc – 220W (320W for XTO22I.nn) voltage! Touching live
electrical parts may expose you to hazardous electrical currents and may lead to burns.
➔ Make sure that the printer is switched off before connecting the power cable.
➔ Only connect the 48Vdc Power Supply to a grounded power socket fitted to
authorised standards.
A. Connection to the 48Vdc-220W (320W for XTO22I.nn) Power Supply
B. RS232 connection DSUB 9 pin female
C. USB-A/USB-B interface for label files exchange with USB memory stick (disk A, disk B)
D. USB device for direct connection to the PC (not enabled)
E. RJ45 LAN port (Ethernet 10/100/1000 defaut DHCP enabled) for customer network
connection
F. DISPLAY POE port for EIDOS HMI connection or for the PC in the absence of a touch screen
panel (XTO printer IP: 10.0.0.1 not changeable)
G. Digital 24V I/O SIGNALS for print command, anomaly, external safety, page I/O...
connections
H. CAN-BUS port for external devices (not managed)
I. Encoder port for packaging line speed detection (XTO2.c)
J. Connection to ground
For detailed information, refer to the chapter "Installing the printer >
Technical Manual.
Edition C - 01/2024
Figure 26: rear panel
19
" in the RT806
CONNECTIONS
Product DESCRIPTION